CFM Technologies GM Tbi Performance Parts where featured in "Trucks" Magazine
Issue #20 June/July 2003. Click here for article : Magazine Feature
| Go back to: Catalog | View Cart | ||
 |
#PP-100 CFM Technologies' TBI POWER PLATE for 4.3/ 5.0/ 5.7L GM TBI with single air cleaner stud - most '87 thru '91 | $83.95 | |
| Our GM throttle body spacers make more horsepower than any other available today. We guarantee it! 30 days! less s&h. More... |
|||
 | |||
 |
#PP-200 CFM Technologies'TBI POWER PLATE for 4.3/ 5.0/ 5.7L GM TBI with dual air cleaner studs - most '92-'95 | $86.95 | |
| All the same features as our #PP-100 above but with custom hardware to mount the dual air cleaner hold down stud applications. More... |
|||
| |||
 |
Air Intake - Cold Air Intake Tube - Full Size GM Tbi Truck- New Product!!! | $29.00 | |
| 4.3/5.0/5.7 Full Size Tbi Trucks - Including 92-95 7.4L with 6" Connection More... |
|||
| |||
 |
Air Intake - Hypertech Power Charger - 4.3/5.0/5.7 Full Size Truck | $44.95 | |
| Yet another cheap way to add major airflow to your Full Size Truck's Engine! More... |
|||
| |||
 |
Air Intake - Injector Spacer | $21.95 | |
| 5-7% air flow increase for $22! Unbelievable! More... |
|||
| |||
 |
CFM-Tech High Flow Ported '87-'95 5.0/5.7 GM Throttle Body | $229.00 | |
| Ported and Rebuilt GM Throttle Body Housings More... |
|||
| |||
|
CFM-Tech High Flow Ported and Blueprinted GM Tbi 7.4L 454 Throttle Body | $229.00 | |
| CFM-Tech High Flow Ported and Blueprinted GM Tbi 7.4L 454 Throttle Body More... |
|||
| |||
 |
Fuel - CFM-Tech Adjustable Fuel Pressure Regulator for GM Tbi | $73.95 | |
| This CFM-Tech Adjustable Fuel Pressure Regulator is a "must have" for stock and modified GM tbi engines. More... |
|||
| |||
 |
Fuel - CFM-Tech Fuel PSI Adapter | $39.95 | |
| NEW!!! A fuel psi adapter that mounts inline directly to your GM tbi throttle body!!! More... |
|||
| |||
 |
Fuel - Flow Matched Tbi Injectors | $169.95 | |
| These matched injectors flow within 1% of each other. The factory's have tested up to a 15% flow difference! More... |
|||
| |||
 |
Oxygen Sensor - 3 wire (Heated) | $73.95 | |
| Heated Oxygen Sensor - 3 wire ***Reduced - was $89.95*** More... |
|||
| |||
 |
Tbi Injector Install Kit | $9.95 | |
| All necessary gaskets and o-rings to install GM tbi injectors and/or a fuel pressure regulator More... |
|||
| |||
 |
Tbi Injector Pod | $39.95 | |
| GM Tbi Injector Pod More... |
|||
| |||
 |
Tbi Rebuild Kit 4.3/5.0/5.7 | $41.95 | |
| This kit includes all gaskets, o-rings, injector filters, and regulator diapghragm to completely overhaul your GM tbi unit. More... |
|||
| |||
 |
TBI to 4bbl Intake Adapter Plate | $52.95 | |
| Adapter Plates for all GM 2bbl. Tbi's to spreadbore or squarebore 4bbl intake manifolds More... |
|||
| |||
Our GM Tbi Performance Parts Will Give You More Horsepower and MPG !!!
How do we know? We use what we sell.
|
40hp for under $265!!! with our easy to install bolt on parts. A 1992 Suburban with 5.7L Tbi and 140,000 miles made 27rwhp (that's almost 40 flywheel hp!) on an otherwise stock engine with the parts below. Another customer's '94 Suburban went from a stock 140hp to 185hp on a chassis dyno with the below parts and an upgraded computer chip.
* We strongly advise to purchase the CFM-Tech Tbi Fuel Pressure Adapter and fuel psi guage to check stock setting, adjusted setting, and future fine tuning settings. Stock is listed at 9-13psi, with most being tested at 10- 12psi. A good baseline when using the above parts is 13.5-14psi. Every .5psi makes a difference on these systems!!! 'Trucks' feature article on the above parts also netted the following mpg results during their 2600 mile test:
|
NEW!!! CFM-Tech Fuel Psi Adapter (pat. pending) for the GM Tbi.
CFM-Tech adapter shown with optional 15psi fuel pressure gauge. Our fitting installs into the GM Tbi unit by replacing the OE injector pod to fuel line inlet adapter. It features two 1/8" NPT fittings and one screw in plug. Imagine being able to install a mechanical gauge under the hood in the engine compartment and/or an electrical gauge in the driver's cockpit - all without having to cut fuel lines, bypass the fuel filter, or climbing under your vehicle as is needed with most other tbi fuel psi testers. We don't just sell great products - we make them and use them.
|
|
FEEL THE POWER - Annihilate your competition with our: CFM-Tech High Flow Ported and Blueprinted 454 / 7.4L GM TBI Throttle Bodies
or our CFM-Tech High Flow Ported and Blueprinted 5.0/5.7 GM TBI Throttle Bodies
*See product details in catalog above
|
Horsepower is all about airflow and fuel distribution Not marketing! Sorry to break the news.
Our GM Tbi Power Plates are Sweeping the Nation For those who may have some technical airflow related questions as to why our CFM-Tech Tbi Power Plate Tbi Spacers out-power all our competitors Click Here. You will find this interesting.
|
"I wanted to write to you and tell you
I got my custom chip the other day for my 91 Caprice (originally a 305 cid) with
a TBI Vortec 350 in it. WOW! I never dreamed what a difference it would make.
With the 350 injectors, right computer, and the new chip I not only have more
power, but got a 35% increase in mileage on my first tank of gas! My 350 is
getting near 20mpg!!! Thanks for your help, and I will recommend you to anyone."
- Glen F.
Visit our TBI Tuning Page for very valuable performance information!
Patent #D416618